Probably this is the worst situation, because it can happen any time. But their are many reasons and solution behind this, I'll tell you how to fix this error and what are the major causes behind it.
Before we start you should know about the error. The Desktop Management Interface (DMI) is a new method of managing computers in an enterprise. The main component of DMI is the Management Information Format Database, or MIFD (the DMI Pool Data). This database contains all the information about the computing system and its components.
Causes of error
At the time of boot system tries to update the changes to the motherboard BIOS settings, changes in hard drive or operating system, it can happen due to physical drive or any wire is removed from the system (Motherboard) and it may can happen sometimes due to high humidity computer gets freezes.
How to Fix it?
Method 1 :
- Apply power to the computer.
- Access the system BIOS.
- Set the drive type as None or Not Installed.
- Then Load the BIOS Defaults
- Then Load the SETUP Defaults
- Save the BIOS changes and reboot the PC to a System Boot Diskette.
- Shut down the PC after the memory count is displayed.
- Reconnect the power and interface cables to the hard drive.
- Access the System BIOS.
- Auto-Detect the hard drive. Ensure that the LBA Mode option is enabled.
- Save the BIOS changes and restart the PC with a System Diskette.
- Partition and format the hard drive via the operating system.
- Restart the system. On boot, the screen should read:
- Verifying DMI Pool Data
- Update Successful
- Apply power to the computer.
- Access the System BIOS.
- Disable both the Internal and External CPU Cache. These features are located in either the "BIOS Features" or "Advanced Settings" options of the BIOS Setup.
- NOTE: Consult the System or Motherboard User's Manual for exact location of the Internal and External CPU Cache settings.
- Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:
- Verifying DMI Pool Data
- Update Successful
- The system should continue booting normally.
- After the system successfully boots, re-start the PC and access the system BIOS.
- Enable the External CPU Cache. This feature is located in the "BIOS Features" or "Advanced Settings".
- Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:
- Verifying DMI Pool Data
- Update Successful
Note: Consult the System or Motherboard User's Manual for exact location of the External CPU Cache setting.
Warning: User's MUST re-enable this feature after resolving the problem for optimal system performance.
Method 3 :
Removing the "Clear CMOS" Jumper and resetting the system BIOS
Obtaining and applying a Flash BIOS Upgrade for your motherboard.
1. Remove the "Clear CMOS" Jumper to reset the system BIOS
2. Get a USB Drive(Pen drive) download Flash update according to your motherboard and update your system at boot.
Note: Flash upgrade is not available to all motherboard. Consult your User's Manual for exact location of the CMOS Jumper
Method 4 :
1. Re-install the Operating System with an USB or bootable DVD (Please don't force the setup to install when it is unable to detect the drivers).
Method 5 :
Computer often freezes due to High Humidity and it may cause problem at boot.
First start computer and keep it running for few minutes ( Keep the computer ON, even it is stuck at boot). Shutdown your computer and remove the RAM. Clean the RAM with an eraser (Don't touch the golden part of the RAM with naked hands). Install the RAM again and re-boot your computer. "Hope this will work", If you are still facing the problem keep the computer on few more minutes sometimes hardrive also freezes (This rarely happens).
These are the most common reason for this Error. I had tried my best to help you, If your still facing the problem kindly contact to your system manufacturer. Method 5 helped me.
0 Reviews:
Post a Comment